It’s the middle of the Summer and the heat is beginning to wear on us all. The conversations and small talk are all the same; stay cool, stay inside, drink plenty of liquids and keep reapplying the sun block. There is no better time of the year to have a patio umbrella helping provide comfort from the relentless Sun. But there is an option that most people are not familiar with – the cantilever umbrella.
The official definition of the term cantilever is “rigid structural element, such as a beam or a plate, anchored at only one end to a support from which it is protruding.” In terms of an umbrella, it simply means that the pole is not in the center as with a traditional market umbrella. Instead, a strong support pole rises vertically from one side, there is an arm that protrudes to the side and the canopy of the umbrella is suspended from above. This allows full movement and openness below your umbrella. While many consumers are not familiar with this shade option, it is the fastest growing segment for shade in the industry.
This is a creative way to make an umbrella, but what does it truly offer that other options don’t? Good question! There are many benefits to this type of umbrella, especially when you consider a higher quality product such as the offerings from Treasure Garden. Here are a few:
- No center pole – a center pole visually and physically blocks your entertaining area
- Larger canopies – the stronger structure allows for the largest shaded area.
- Tilt options – many cantilever umbrellas can tilt to an almost fully vertical position
- 360 degree spin – Treasure Garden has several cantilevers than can spin around the base 360 degrees, allowing you to move your shade as needed
- It is not permanent – while they are extremely heavy, they can be moved unlike an awning
Common cantilever umbrella sizes are 11’ round, 13’ round and even 13’ x 8’ rectangular. But, there are sizes that go up to 20’. Amazing large and extremely impressive to see. Visit http://www.fhcasual.com/umbrellas/treasure-garden to see some of your options that are available at The Fire House Casual Living Store.
Anyone considering ordering and installing a new fireplace in their home or business needs to understand the three types of heat in order to make an excellent shopping decision. Companies that manufacture modern fireplaces will build the device to provide one of these three types of heat:
• Radiant heat – nice ambience from wood or gas logs
• Conventional heat – similar to how a gas or electric furnace works
• Conductive heat – transfers warmth quickly through various materials
In addition to looking at an assortment of fireplace styles in a store’s showroom to find one with décor that looks beautiful in a room, customers must determine if it meets their heating needs. There are pros and cons to each variety of heating that a consumer should consider before having a fireplace installed.
Radiant heat has always been popular because it resembles what people experience naturally from the sun. Because this variety of heating does not require radiators or ductwork in a building, it is suitable for areas without those devices. This is the oldest form of heating for a building because it is emitted easily from fireplaces that are usually located along one wall of a room. Today, it is also possible to have fireplaces installed in other areas of a room with the expertise of a knowledgeable installation team. Instead of heating the air in a room, these fireplaces warm objects and people.
People are accustomed to conventional heat because that is what is in most buildings today. This variety of heat is emitted by traditional gas or electric furnaces that are typically installed in commercial and residential properties in the United States and Canada. Electric and gas furnaces suction air from a building into its system to warm the air before blowing it through a building’s ductwork and vents. While many private residences and businesses have this type of heat, it is not always effective at keeping occupants warm in certain rooms where there are drafts, leading to people wanting a supplemental fireplace installed.
Conductive Heating or Thermal Conduction
A conductive heat device transfers warmth through a material that is solid or liquid. Copper, glass or ceramic are some of the most common conductive materials used in heating devices because warmth transfers quickly from one location to another. This leads to fireplaces with glass covers to protect a building’s surfaces from the sparks of flames in the firebox. Also known as thermal conduction, the stoves or fireplaces used for this heating method are often made of stacked and mortared brick or metal, such as cast iron, that transfers warmth without degrading.
A quick review of the three types of heat can help someone choose a fireplace that provides many years of enjoyment while keeping a room warm during cold winter temperatures.
Nothing gives people a cozy, warm feeling like a crackling fire. Real wood fireplaces have been an integral part of life from the dawn of time. They provided heat to the living space, a place to cook food, and were often the centerpiece of family gatherings.
Nowadays, central heating keeps toes toasty warm, yet fireplaces still hold fascination for homeowners. Although they don’t typically heat the whole house, the brick and stone do hold heat. The way the heat is dispersed in modern fireplaces is due to Sir Benjamin Thompson, who, in 1795, decided to redesign it. He angled the side walls in which disbursed radiant heat into the room. He made the firebox small and shallow with a deeper throat or flue.
The two main types of this fireplace design are available to homeowners: gas logs for fireplaces and real wood fireplaces. Gas logs have begun to fascinate people, so much so that they’ve given up their axe for a remote with which to turn on the fire. That’s good, because termites and other creepy-crawlies love woodpiles, which can mean trouble for the house. Gas logs come in vented and vent-free versions. Obviously, the vented gas logs need to have a functional chimney just like a wood-burning fireplace would have. They produce a realistic show quite like a wood-burning fire. They also produce soot and carbon that needs to be expelled from the house via a flue or chimney. The heat from vented gas logs closely resembles the heat from a wood-burning fire.
Vent-free logs don’t need any venting. They’re not as pretty as vented gas logs, but they do put out some serious heat. Vent-free gas logs can be approved for fireplaces without chimneys or for fireplaces whose flues are closed. There is some question, however, of the indoor air quality when these gas logs for fireplaces are burned for longer lengths of time.
Wood can be found free of charge or it can come in cords for a price. Wood logs leave ash and soot inside of the fireplace. It takes wood logs much longer to cool down in addition to the worry of smoldering embers causing problems. Wood-burning fireboxes and stoves cast no shadow on the power bill. It does, however, cost a bit to clean the fireplace and chimney in the spring. For ambience and aesthetic pleasure, real wood fireplaces can’t be beat. The aroma from certain woods being burned is also hard to beat. Remember that wood-burning fireplaces should be inspected each year in order to keep a check on the byproducts of wood. These build up over time and are more likely to cause fires within the chimney.
Be sure to think about what you are wanting out of your fireplace before you choose one type over the other.
When it comes to deciding how you will heat your home or which type of fireplace to purchase, there are many options. One of the most popular options are gas log fireplaces. Just as the name implies, these fireplaces often look like a normal fireplace, but the logs are made of man-made materials and are fueled by gas. There are many advantages to using gas logs over traditional wood-burning techniques. Here, we address a few common questions about gas logs.
The first thing that most people want to know about gas logs is the difference between vented and ventless ones. Basically, vented gas logs are logs that must be burned with the fireplace’s damper open. Customers choose these because they are the most realistic. Ventless gas logs can be burned with the fireplace damper closed. While they are not as realistic, they produce much more heat into your home. Whether you need vented or ventless gas logs may depend upon the type of fireplace you currently have as well as how you plan on using them.
Another common question about gas logs that new users often have is whether or not they are safe to install in their current fireplaces. If you have a wood-burning fireplace, you can probably install gas logs in it. However, if you have a gas fireplace, chances are you can’t install gas logs in it. Masonry fireplaces and prefabricated wood-burning fireplaces are almost always all right for vented gas logs and usually okay for ventless gas logs. Ventless fireplaces and fireboxes are only okay with ventless gas logs. B-vent gas fireplaces, direct vent gas fireplaces, and wood and gas stoves cannot be retrofitted with either vented or vented gas logs. Please contact us to learn more regarding your specific scenario.
Because gas logs run off of gas, it is important for you to know the difference between natural gas and propane. The major reason for choosing one over the other is simply what you have access to. Depending upon where you live, you might have access to one, the other or both. Natural gas is piped into your home direct from the source, so you will never run out. You will simply get a monthly bill for the amount you use. Propane tends to cost more than natural gas, but propane tanks can be used anywhere so sometimes are the only choice if natural gas lines are not in your area. Rural areas are usually limited to propane gas only. Propane tanks need to be refilled once they get low. You pay the provider only when you get your tank filled.
One of the main advantages to using gas logs is that they are easier to use without the clean up required for real wood burning fireplaces. Plus, most gas logs still have all the charm of a natural wood-burning fireplace. Many people like the authenticity that vented gas logs provide with their realistic-looking flames that dance and wrap around the logs as if they were real wood. Others choose ventless gas logs to get much more heat than an open wood burning fireplace.
Gas logs offer consumers numerous advantages when they’re looking for more economical ways to heat their homes. They provide all the heating comforts that real wood-burning fireplaces do without all the mess and hassle that is involved with upkeeping a wood-burning fireplace.
There are few things more charming and inviting during the winter months than the warm glow of a fire burning in a fireplace. If you have made the decision to invest in a new gas log fireplace for your home, you may be wondering what are the differences between vented and vent free gas log fireplaces. The fact is that these different models of fireplaces are very different, and you may find that one option is clearly superior for your needs than the other one. With a closer look at the differences between vented and vent free gas log fireplaces, you will be able to make a better decision for your home.
What Are Vented Gas Log Fireplaces?
With a vented gas log fireplace, you will have the most realistic look available. This type of fireplace requires you to have a full ventilation system installed with the fireplace, because vented gas logs produce fumes that must be ventilated outside of the home. These are gas logs that produce a realistic-looking, yellowish flame that actually wraps around the logs in a natural way. Also, these types of gas logs can have more glowing embers on the set than all other types, creating a look of a fire that has been burning for hours. Vented gas logs will produce some radiant heat, but the majority of the heat typically flows upward out of the chimney. Because of this, this type of gas log is typically used more for ambiance in the home rather than as a heat source.
What Are Vent Free Gas Log Fireplaces?
On the contrary, a vent free gas log fireplace is typically purchased for its heating capabilities. These have a less realistic look than a vented gas log will have, but the heat produced from these fireplace logs can heat a room rather quickly. They are a great emergency or secondary heat source for a home. These logs can be installed in an existing fireplace and used with the damper closed because they will not produce unsafe emissions. They burn cleanly, and they use less gas than their vented counterparts. In addition, there is less pollution from them, and this makes the vent free gas log fireplaces a more environmentally friendly solution, especially as compared to burning real wood. You should be aware, however, that these logs can produce extra moisture or humidity in the home. Initially, many people think this is a negative, but this is usually a benefit in winter months when the air is very dry. Also, vent free gas logs are not designed to be a primary heat source for your home. They are only intended to be used for up to 6 hours at a time.
If you are looking for a gas fireplace that adds charm and character to your home, vented gas log fireplaces are a great option. If you are interested in investing in fireplaces for warmth, vent free gas log fireplaces are a better choice. There are many styles available for both models, and this makes it easy for you to find the right model with the right look for your home.
Discover the benefits of using gas logs and a gas fireplace to heat your home all throughout the cold winter months.
Paste the Code Below to Embed this Image on Your Site
If you have made the decision to install a new stove in your space for the purposes of heating your home, you may be wondering what the difference is between wood stove and gas stove models. From the exterior, most models for both wood-burning and gas-burning options can have an aesthetically pleasing style that adds character and charm to your home. However, there are important differences between a gas stove heating model and a wood-burning model. By analyzing these differences, you can determine which is right for your home.
The Cost of the Fuel
The cost of fuel for gas stoves versus a wood model can be considerable, but it can also vary based on your location. Gas is typically a cleaner-burning option, but it also can be more costly. Wood may also have a cost associated with it if you need to buy firewood, and you may have to pay to have it delivered if you are not willing or able to go out and get it yourself. If you live on heavily wooded acreage, you may have access to plenty of wood on your property. If this is the case, fueling a wood stove may be free for you.
The Availability of the Fuel
The availability of the fuel source is also important when you are relying on the stove for heat. After all, the last thing you want is to run out of fuel and not have access to the heat you need on a cold day. Gas stoves generally are connected to a gas line, and you may have an unlimited supply of gas available to you. With wood, you may indeed run out of fuel if you do not monitor your supply regularly. Keep in mind that wood stove heating models may use several dozen logs a day to provide you with warmth on the chilliest days of the year.
The Generation of Heat
If you are using a gas stove heating model to produce warm air, you can expect to have access to a rather reliable source of steady heat. There will be minimal fluctuations with regards to the amount of heat produced or the temperature of the air unless you physically adjust the level. It can be more difficult to enjoy this steady source of heat from a wood stove heating model. Some fires may burn more intensely than others, and this can make it challenging for you to enjoy steady heat from the fire. However, it is important to note that wood may burn at a higher temperature than gas, so you may enjoy warmer fires from your wood stove.
You may be thinking about investing in wood or gas stoves for your home, and there are numerous models to consider. The difference between wood stove and gas stove models is more than just aesthetic, so you should consider each of the points mentioned here to determine their impact on you. This can help you to make a better decision about how to heat your home.
If your home has a fireplace, you inevitably will need to purchase a number of functional fireplace accessories to use on a regular basis. Fireplace accessories generally serve one or more specific purposes related to the use of the fireplace, but they also generally have a cosmetic or aesthetic benefit to your space. With a closer look at some of the more common types of accessories available, you may be able to determine which options are the right ones for you to invest in today.
When you use your fireplace, it is common for small sparks to fly out of the fire from time to time. This is more common with a wood-burning fireplace than a gas-burning fireplace due to the crackling nature of the wood burning. Fireplace screens generally are placed on the hearth right in front of the fireplace. Most have a three-sided feature that allows the cover to project outward from the fireplace, but some have a flat design. They typically are made of either a glass and metal construction or a combination of metal framing with a mesh screen. Many are highly decorative, and they can enhance the style of the space even throughout the summer months when the fireplace is not in use. Glass can block the heat that may radiate from the fireplace, so many homeowners who use their fireplace for heat often choose a design that features the mesh screen with a metal frame.
Fireplace Tool Sets
Fireplace tool sets are more commonly used with wood-burning fireplaces. This is because they may be used to place wood onto a burning fire, adjust the position of the logs, and remove the ashes after the fire has been extinguished. None of these tasks are typically required with a gas fireplace that does not burn real wood. However, there is some charm associated with having fireplace tools placed next to the screen on the hearth. Because of this, some homeowners will use them as a decorative accessory even with a set of gas logs. Typically, these are made from non-flammable materials like metal, and they may be placed on a decorative display stand.
Fireplace Glass Doors
Another popular fireplace accessory is a fireplace glass door. Not only are glass doors a great way to decorate your fireplace, but they are also very functional. For wood-burning fireplaces, the glass doors can be used to smother the fire and provide additional protection when waiting for a fire to die out. The fireplace glass doors can also be an energy efficient way to block cold air from entering into your home. There are many styles and finishes to choose from that can change the entire look and feel of a room.
Selecting the right accessories to use with your fireplace can help you to create a more pleasing ambiance near the fireplace and to enjoy use of the fireplace regularly. You can easily begin reviewing some of the different types of accessories currently available to determine if you would benefit from making an upgrade.
The trend towards gas logs for fireplaces is continuing to increase in homes all across the country. Gas log heating is extremely beneficial for many homeowners. They represent the warmth and beauty of a regular fire, but with less mess and hassle. It is very easy to operate and own gas log heating devices in your home. A gas log set can be turned on or off in seconds. That is much easier than dealing with a wood burning fireplace that requires much more time and effort.
Another benefit of gas logs is that they don’t require the cleaning that a regular wood-burning fireplace does. The gas log does not create cinders or thick soot to clean. This makes it so much more convenient for homeowners because the gas logs don’t create a mess. They are extremely easy to care for because they operate by gas and not by messy wood.
The gas logs are controlled by a knob or switch. Most of our customers prefer to have their gas log set with a remote control. This is convenient for a homeowner because they don’t have to worry about getting close to the fire; it just goes on by itself with the push of a button or switch.
There are two types of gas logs offered today: vented and vent-free. While vent-free gas logs have been the go-to for heat, advancements in technology have created vented logs with the benefits of radiant heat. Now, either type of gas log you choose can produce more heat than a wood-burning fireplace. Gas log heating is a great way to add comfortable heat into your home and have a great looking fire at the same time.
The benefits of gas logs are ease of use, less mess and more heat. These are great reasons to consider adding a new set to your fireplace. They are also great for adding value to your home. Potential buyers are always impressed by an easy-to-use fireplace that can be turned on with a remote. As the weather turns colder, it is the right time to look for a gas log for your fireplace to take advantage of all the benefits it will create for you.
A fireplace inspires relaxation on cold days and encourages you and your family members to cozy up for quiet times together. More than that, a fireplace mantel may be used for everything from displaying family portraits to hanging stockings during the holiday season. If you do not currently have a fireplace installed, we encourage you to review your fireplace choices in preparation for future installation. The two main options are a gas-burning fireplace and a wood-burning fireplace. When choosing a fireplace option that is right for your home, you should consider a few points.
Ease of Use
There is a considerable amount of flexibility with regards to the style and outward appearance of the fireplace, so it is important to consider the ease of use as a primary point. Starting a gas fire is generally easy for most to do, and it involves simply turning on the gas and igniting the fuel source. Some fireplaces come with an ignition switch, and others have evolved to using a remote, which is extremely easy. Starting a wood-burning fire may require the use of starter logs, crumpled up pieces of newspaper, and other more flammable objects. In some cases, you may need to nurse a wood fire for many minutes before the logs truly start to burn on their own.
To maintain a wood-burning fireplace, you generally will need to wait for the ashes to cool to clean the space. The ashes can quickly mount so this can be a regular and often messy chore to contend with. You also may need to be more active about monitoring your fuel source with a wood-burning fireplace. After all, you will need to keep a pile of dry wood in stock as well as kindling or other materials. A gas-burning fireplace has reduced regular maintenance requirements, but you should be aware that you will need to have the gas connections inspected regularly. Most homeowners have their gas fireplaces inspected every few years.
When you review fireplace choices, ambiance is not a factor to overlook. A fireplace may be used for warmth, but there are few things that can warm your heart and relax your mind more easily on a cold day than the warm glow and delightful smell of a wood burning fireplace. A gas-burning fireplace also has much charm to it, but the unique combination of the sight, smell and sound of real wood burning in a fireplace is hard to beat.
Choosing a fireplace can be challenging to do for many reasons. In addition to paying attention to these factors, you may consider the availability of a gas line in your home as well as your access to firewood. In addition, the cost of installation for each one should be considered. Regardless of which type of fireplace you choose to install in your space, you can rest assured that you and your loved ones will enjoy spending many days and evenings curled up beside it through cold, rainy days and long winter nights.